Epson TM-T81

Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
111 112
A
TM-T81
Specification
(STANDARD)
6.4 Obsolete Commands
ESC i [obsolete command]
GS V, which is the upward-compatible command replacing ESC i, is recommended for use, since ESC
i is an obsolete command in the ESC/POS
®
command system.
[Name] Partial cut (one point left uncut)
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] • Executes a partial cut of the roll paper.
[Note] • This printer executes a partial cut (one point left uncut).
ESC m [obsolete command]
GS V, which is the upward-compatible command replacing ESC m, is recommended for use, since
ESC m is an obsolete command in the ESC/POS
®
command system.
[Name] Partial cut (three points left uncut)
[Format] ASCII ESC m
Hex 1B 6DF
Decimal 27 109
[Description] • Executes a partial cut of the roll paper.
[Note] • This printer executes a partial cut (one point left uncut).