Epson TM-T81 Technical & Specifications Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
A
App.11 App.10
TM-T81
Specification
(STANDARD)
An example program in which the drawer connected to drive signal 1 is driven with an ON time of 200
ms is shown below.
PRINT #1,CHR$(&H1B);"p";CHR$(0);CHR$(100)
;CHR$(250);
GOSUB ∗WAIT300MS
ON time 200 ms OFF time 500 ms
∗WAIT300MS
300[ms]wait routine (∗)
RETURN
(∗) Corresponds to α of Formula F-3. Set the value so that it satisfies Formula F-3 (or include
an internal processing time that is equal to or longer than this wait routine).
The drive signal waveform generated when the drawer is driven according to the above conditions is
shown in Figure F-2.
Figure F-2 Drawer Drive Signal Waveform (Formula F-3)
OFF
ON
200 ms
α = 300 ms
500 ms

Epson TM-T81 Specifications

General

Print Method	Thermal line printing
Autocutter	Yes
Interface	USB, Ethernet
Dimensions	140 mm (W) x 199 mm (D) x 146 mm (H)
Power Supply	AC 100 V - 240 V, 50 Hz - 60 Hz
Paper Width	79.5 ±0.5 mm