Epson TM-T82II User Manual

22
Printing Specifications
dpi: dots per inch
*: when the printer prints with the standard print density level at 25°C {77°F} and 24V.
80 mm width paper
printing
58 mm width paper
printing
Printing method Thermal line printing
Dot density 203 × 203 dpi
Paper
width
Normal mode (initial setting) 72.0 mm (2.83"), 576 dots 52.5 mm (2.07"), 420 dots
42 column mode 68.3 mm (2.69"), 546 dots 47.3 mm (1.86"), 378 dots
Character
spacing
Normal mode
(initial setting)
Font A 0.25 mm {0.0098"} (2 dots)
Font B 0.25 mm {0.0098"} (2 dots)
Kanji font 0.00 mm (0 dot)
Special font A 0.25 mm {0.0098"} (2 dots)
Special font B 0.25 mm {0.0098"} (2 dots)
42 column
mode
Font A 0.38 mm {0.015"} (3 dots) 0.25 mm {0.0098"} (2 dots)
Font B 0.25 mm {0.0098"} (2 dots) 0.25 mm {0.0098"} (2 dots)
Kanji font 0.25 mm {0.0098"} (2 dots) 0.00 mm (0 dot)
Special font A 0.38 mm {0.015"} (3 dots) 0.25 mm {0.0098"} (2 dots)
Special font B 0.25 mm {0.0098"} (2 dots) 0.25 mm {0.0098"} (2 dots)
Line spacing 3.75 mm {1/5"} (initial setting, programmable by
command)
Maximum print speed* 200 mm/s {7.87"/s}
 To change the paper width, you need to install the 58-mm width paper guide plate and to
make the paper width setting with the memory switch. For information about how to
change the paper width, see
"Changing the Paper Width" on page 38.
 The printing speed changes automatically depending on the applied voltage and head
temperature.
 The maximum printing speed may not be achieved depending on the type of interface,
the setting of data transmission speed, and the combination of control commands.
 If the data transmission speed is slower than the maximum printing speed, the printing
speed may fluctuate and the print result may become shaded and/or dot displacement in
paper feeding may occur. Furthermore, if the data transmission speed is much slower
than the maximum printing speed, intermittent printing will occur.
Especially when using a serial interface, low transmission speed may cause intermittent
printing. It is recommended to transmit data to the printer as quickly as possible.

Epson TM-T82II Specifications

General

Print Method	Thermal line printing
Print Speed	200 mm / sec
Auto Cutter	Yes
Paper Width	58 mm
Interfaces	USB, Serial, Ethernet