Chapter 1 Product Overview
13
1
Part Names and Functions
Power Switch
Turns the printer on or off. The marks on the switch: ( : OFF/ : ON)
To turn the printer on immediately after turning the printer off, press the Power button after
the LED lights go off.
Before turning the printer off, it is recommended to send a power-off command to the
printer. If you use the power-off sequence, the latest maintenance counter values are
saved. (Maintenance counter values are usually saved every two minutes.)
For information about ESC/POS commands, see the ESC/POS Command Reference.
Roll paper cover
Control panel
Cover open lever
Power switch
Cutter cover
Power switch cover
Manual cutter
To Next Page
Loading...
Need help?
General
