Epson TM-T82II User Manual

34
Installing the Printer
You can install the printer horizontally on a flat surface (with the paper exit on top) or vertically
(with the paper exit at the front). Also, you can hang it on a wall using the included accessories.
 You can use the paper near-end sensor only when you install the printer horizontally.
When you install the printer vertically or hang it on a wall, be sure to disable the setting.
Otherwise false detection occur. For information about the paper near-end sensor, see
"Adjusting the Paper Near-End Sensor" on page 39
.
 Take measures to prevent the printer from moving by vibration during paper cutting and
when using a drawer. Affixing tape (Model: DF-10) is provided as an option.
 Do not place the printer in dusty locations.
 Do not knock or strike the printer. This may cause defective print.
 Do not catch cables or foreign matter under the printer.
Horizontal installation
Vertical installation
Hanging on a wall

Epson TM-T82II Specifications

General

Print Method	Thermal line printing
Print Speed	200 mm / sec
Auto Cutter	Yes
Paper Width	58 mm
Interfaces	USB, Serial, Ethernet