EasyManuals Logo

Epson TM-T82II User Manual

Epson TM-T82II
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
Chapter 3 Application Development Information
83
3
Receipt Enhancement Information Print Mode
You can confirm the following information by running the R/E information mode:
•Automatic top logo setting
•Automatic bottom logo setting
•Extended settings for automatic top/bottom logo
Starting the R/E information print mode
Follow the steps below to run this mode.
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Keep pressing the
Feed button until the printer starts printing.)
The printer starts printing current status of the printer.
When the printer finishes printing the printer status, the following message is printed and
the Paper LED flashes. (The printer is now in the self-test wait mode.):
“Select Modes by pressing Feed button.
Continue SELF-TEST: Less than 1 second
Mode Selection: 1 second or more”
3
Press the Feed button. (Keep pressing the Feed button until the printer
starts printing.)
The printer starts printing instructions.
4
Press the Feed button twice.
5
Then press the Feed button. (Keep pressing the Feed button until the
printer starts printing.)
The printer starts printing the R/E information.
Turn the power off and on to return to the normal mode.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM-T82II and is the answer not in the manual?

Epson TM-T82II Specifications

General IconGeneral
Print MethodThermal line printing
Print Speed200 mm / sec
Auto CutterYes
Paper Width58 mm
InterfacesUSB, Serial, Ethernet

Related product manuals