38
Changing the Paper Width
You can change the paper width from 80 to 58 mm by installing the included 58-mm width roll
paper guide. Follow the steps below to change the paper width.
1
Open the roll paper cover.
2
Align 3 projections on the 58-mm width roll paper guide with the
rectangular holes in the printer, and push it downwards.
Because some parts of the print head and the autocutter contact the platen and they
may become worn out, once you change the paper width from 80 to 58 mm and use the
printer, you cannot change it back to 80 mm.
When changing the paper width, be sure to make the setting for the paper width with the
memory switch. For information about the memory, see "Setting the Memory Switches/
Receipt Enhancement" on page 51
Rectangular holes
Roll paper guide
To Next Page
Loading...
