Epson TM-T82II User Manual

Chapter 2 Setup
51
2
Setting the Memory Switches/Receipt Enhancement
With the memory switch and R/E (receipt enhancement) function, which are software settings
for this printer, you can set the various functions.
For an outline of the functions, see the following section. Use the methods shown in the table
below; TM-T82II Utility, Memory S witch Setting Mode, or ESC/POS comman
ds, to set the
memory switches and R/E functions.
Item\Method
TM-T82II
Utility
Memory
Switch
Setting Mode
ESC/POS
Commands
Memory Switches
Receive buffer capacity
✔✔
BUSY condition
✔✔
Processing when data receive error ✔✔
Auto line feed
✔✔
USB power-saving function
✔✔
Release condition of receive buffer BUSY ✔✔
Paper sensor to output paper-end signals default*
1
✔✔
Error signal output ✔✔
Paper near-end sensor ✔✔✔
Customized Values
Paper width
✔✔✔
Print density ✔✔✔
Print speed ✔✔✔
Thai character print mode*
2
✔✔
Character code table default ✔✔✔
International character default ✔✔✔
Interface selection
✔✔✔
Power supply unit capacity ✔✔✔
Number of columns
✔✔✔
Autocutting after closing cover
✔✔✔
Paper reduction ✔✔✔
Font A auto replacement
✔✔
Font B auto replacement
✔✔
Buzzer ✔✔✔
Logo 180 dpi emulation mode
✔✔✔
Communication condition of serial interface
✔✔✔
Communication condition of USB interface ✔✔✔

Epson TM-T82II Specifications

General

Print Method	Thermal line printing
Print Speed	200 mm / sec
Auto Cutter	Yes
Paper Width	58 mm
Interfaces	USB, Serial, Ethernet