Epson TM T88V - Additional Functions and Functional Improvements; Paper Width; Print Speed; Barcodes

100
Additional Functions and Functional Improvements
Paper Width
You can change the printer to print on 58 mm width paper by installing the roll paper guide and
changing the paper width setting with the customized value.
Print Speed
The TM-T88V has increased its print speed up to a maximum of 300 mm/s.
Note: When the printer prints text (built-in fonts) with the default print density level at 24V and
25°C {77°F}.
Barcodes
With the TM-T88V, printing the following barcodes, two-dimensional symbols and composite
symbology is additionally possible.
•GS1-128
•GS1 DataBar Omnidirectional
•GS1 DataBar Truncated
•GS1 DataBar Stacked
•GS1 DataBar Stacked Ominidirectional
•GS1 DataBar Limited
•GS1 DataBar Expanded
•GS1 DataBar Expanded Stacked
•MaxiCode
•Composite Symbology
Once you change the paper width form 80 mm to 58 mm, you cannot change it back to 80
mm.
TM-T88V TM-T88IV
Maximum print speed
300 mm/s 200 mm/s
Print speed setting
(Customized value)
Level 1 to 13 Level 1 to 9
Depending on print conditions such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted.