16
Part Names and Functions
Power Switch
Turns the printer on or off. The marks on the switch: ( : OFF/ : ON)
CAUTION
Before turning on the printer, be sure to check that the AC adapter is connected to
the power supply.
Before turning the printer off, it is recommended to send a power-off command to the
printer. If you use the power-off sequence, the latest maintenance counter values are
saved. (Maintenance counter values are usually saved every two minutes.)
For detailed information about ESC/POS commands, see the ESC/POS Application
Programming Guide.
Roll paper cover
Control panel
Cover open button
Power switch
Cutter cover
Power switch cover
Connector
cover
To Next Page
Loading...
