24
Product Specifications
Printing method Thermal line printing
Cutting method Partial cut (cutting with one point in left edge left uncut)
Roll paper (single-ply) width 80 mm width paper printing: 79.5 ± 0.5 mm (3.13 ± 0.02")
58 mm width paper printing: 57.5 ± 0.5 mm (2.26 ± 0.02")
Interfaces Serial (RS-232), Parallel (IEEE1284), Ethernet (10/100BASE-T),
USB (Full-speed), Wireless LAN (IEEE802.11b)
Buffers Receive buffer 4 KB/45 bytes (selectable using DIP switch 1-2)
Downloaded buffer 12 KB (both for user-defined characters and downloaded
images)
NV graphics data 256 KB
Barcode/two-dimensional symbol/
composite symbol printing
UPC-A, UPC-E, JAN 8 (EAN 8), JAN 13 (EAN 13),
CODE 39, ITF, CODABAR (NW-7), CODE 93,
CODE 128, GS1-128,
GS1 DataBar Omnidirectional, GS1 DataBar Truncated,
GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional,
GS1 DataBar Limited, GS1 DataBar Expanded,
GS1 DataBar Expanded Stacked,
PDF417, QR CODE, MaxiCode,
Composite Symbology
DKD function 2 drives
Supplied voltage DC 24 V ± 7%
Life Mechanism 20,000,000 lines
Thermal head 150 million pulses
150 km
Autocutter 2,000,000 cuts (when using the specified original paper types,
PD150R or PD160R)
1,500,000 cuts (when using paper types other than the
specified original paper types)
MTBF 360,000 hours
MCBF 70,000,000 lines
Temperature/humidity Operating: 5 to 45°C {41 to 113°F}, 10 to 90% RH
Storage: -10 to 50°C {14 to 122°F}, 10 to 90% RH
Overall dimensions 145 × 195 × 148 mm {5.71 × 7.68 × 5.83"} (W × D × H)
Weight (mass) Approx. 1.6 kg {3.5 lb} (roll paper excluded)