EasyManuals Logo

Epson TM T88V Technical Reference Guide

Epson TM T88V
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Chapter 3 Application Development Information
87
3
Receipt Enhancement Information Print Mode
You can confirm the following information by running the R/E information mode:
•Automatic top logo setting
•Automatic bottom logo setting
•Extended settings for automatic top/bottom logo
Follow the steps below to run this mode.
1
Close the roll paper cover.
2
While pressing the Feed button, turn the power on. (Keep pressing the
Feed button until the printer starts printing.)
The printer prints current status of the printer.
3
After the printing has been completed, press the Feed button for more
than one second.
The printer starts printing instructions.
4
After the printing has been completed, press the Feed button twice.
5
Then press the Feed button for more than one second.
Turn the power off and on to return to the normal mode.

Table of Contents

Other manuals for Epson TM T88V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM T88V and is the answer not in the manual?

Epson TM T88V Specifications

General IconGeneral
Dimensions (WxDxH)145 x 195 x 148 mm
USB portYes
Standard interfacesRS-232, USB 2.0
Serial interface typeRS-232
Serial ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWired
TypePOS printer
Print speed11.8 ips
Print technologyThermal
Maximum resolution180 x 180 DPI
SafetyUL1950/CSA C22.2 No. 950
CertificationFCC/ICES-003
Built-in barcodes2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF-14, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Country of originChina
Autocutter durability2 million cuts
Mean time between failures (MTBF)360000 h
Product colorBlack
Maximum roll diameter83 mm
Supported paper width80, 58 mm
Printing media thickness55 - 80 µm
Storage temperature (T-T)-10 - 50 °C
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Ethernet LANNo
Input current1.8 A
Power supply typeDC
Pallet width800 mm
Pallet height2550 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet128 pc(s)
Quantity per pallet (UK)192 pc(s)
Master (outer) case width400 mm
Quantity per pallet layer16 pc(s)
Master (outer) case height255 mm
Master (outer) case length490 mm
Quantity per pallet layer (UK)24 pc(s)
Quantity per master (outer) case4 pc(s)
Package depth257 mm
Package width193 mm
Package height241 mm
Package weight2660 g
Quantity per pack1 pc(s)

Related product manuals