Chapter 2 Setup
35
2
Setup
This chapter describes setup and installation of the product and peripherals.
Flow of Setup
This chapter consists of the following sections along with the setup flow of the product and
peripherals.
2. Changing the Paper Width (page 37)
7. Connecting the Printer to the Host Computer (page 54)
6. Adjusting the Paper Roll Near-End Sensor (page 53)
4. Connecting the Power Supply Unit (PS-180) (page 47)
8. Connecting the Cash Drawer (page 63)
3. Setting the DIP Switches (page 39)
5. Setting the Memory Switches (Customized Value) (page 48)
1. Installing the Printer (page 36)
9. Setting the Internal Buzzer (for Model with an Internal Buzzer) (page 65)
10. Connecting the Optional External Buzzer (page 66)
11. Attaching the Connector Cover (page 70)
12. Arranging the Cables (page 72)
To Next Page
Loading...
