Epson TM-T88VII - Page 66

66
Chapter 3 Advanced Usage
Output Paper-end Signals
• Enable (default setting)
• Disable
Error Signal Output
• Enable (default setting)
• Disable
Intelligent Settings
Print Data Parsing
• Enable
• Disable (default setting)
Command Execution (Offline)
• Enable
• Disable (default setting)
Power Supply Output
Selectable from levels 1 to 3 low power load
Default setting: level 3
When using a parallel interface, make settings by using the DIP switches.
When using a parallel interface, make settings by using the DIP switches.
The setting item may not be available depending on the region.