Epson TM
U220 Reference Guide

A-2 Comparison table for TM-U220/U210/U300 Rev. E
TM-U300 (Type A, B, C, D) TM-U210 (Type A, B, D) TM-U220 (Type A, B, D)
Paper supply
functions
Roll Paper install method Paper roll holding shaft Paper roll drop in <==
Paper roll setting Auto-loading Auto-loading 1-2-3 setting
Paper end detector Yes Yes <==
Paper near-end detector Yes Option Factory option.
Cover open detector Yes No Yes
Validation detector Yes (Option for type C, D) No Validation function <==
Paper feed method Friction feed Friction feed <==
Paper feed length Default 4.23mm(1/6
inches): changeable by
command
Default 4.23mm(1/6
inches): changeable
by command
<==
Paper feed speed 25 lines/sec 25 lines/sec 30 lines/sec
Paper
specification
Paper roll dimensions Paper width:76mm, Roll
diameter: max.83mm
Paper width:76mm,
Roll diameter:
max.83mm
Paper width:
76mm (Type A)
76mm / 69.5mm / 57.5mm (Type B, D)
Roll diameter: max 83mm
Normal paper Paper thickness:
0.06 ~ 0.085mm
Paper thickness:
0.06 ~ 0.085mm
<==
Carbon
paper
Number of copies Original + 1 copies
Original + 2 copies (at
temperature approx.
25C°)
(Copy mode need to be
set by command)
Original + 1 copies
Original + 2 copies
(type D only)
Original + 1 copies (for all type A, B, D)
Validation paper Type C, D only Not supported <==

Epson TM
U220 Specifications

General

Print speed	4.7 lps
Character size	1.6 x 3.1 mm
Print technology	Dot matrix
Paper dimensions	57.5±0.5/69.5±0.5/76±0.5 x 83.0
Dimensions (WxDxH)	160 x 286 x 157.5 mm
Certification	WEEE/RoHS
Mean time between failures (MTBF)	180000 h
Parallel connector	Yes
Standard interfaces	Parallel