Rev. E Comparison table for TM-U220/U210/U300 A-3
TM-U220 Technical Reference Guide
TM-U300 (Type A, B, C, D) TM-U210 (Type A, B, D) TM-U220 (Type A, B, D)
Take up unit Auto-take up (type A, C) Auto-take up (type A) <==
Autocutter (type A/B) Full cut / partial cut;
selectable by command
Partial cut (one point left
uncut at center position)
Partial cut or full cut (optional factory
setting)
(Partial cut: one point left uncut at right
position.)
Print area A/C position to print start position 36mm 27mm <==
Manual cut position to print start
position
26mm (type A, B)
28mm (type C, D)
20.2mm 34.9mm (Type A, B)
22.1mm (Type D)
Print width 63.5mm (200dots, 400
position)
63.34mm (200dots, 400
position)
76: 63.34mm(200dots,400position), 69.5:
57mm(180,360), 57.5:47.5mm(150,300)
Left margin (6mm) (5.9mm) 76: 6.8mm, 69.5: 6.7mm, 57.5: 4.2mm
Right margin Approx. 6.5mm (6.76mm) 76: 5.8mm, 69.5: 5.8mm, 57.5: 5.8mm
Internal buffer Receive
buffer
ANK model 1K bytes / 40 bytes:
selectable
1K bytes / 40 bytes:
selectable
4K bytes / 40 bytes: selectable
Multi-language
model
512 bytes / 40 bytes;
selectable
512 bytes / 40 bytes;
selectable
4K bytes / 40 bytes: selectable
NV bit
image
ANK model No No 128K bytes
Multi-language
model
No No 128K bytes
User NV
memory
ANK model No No 8K bytes
Multi-language
model
No No 8K bytes
To Next Page
Loading...
Need help?
General
