Setting Up the Printer 1-15
3. Insert the ribbon cassette in the printer and rotate the cassette's
knob two or three more times as shown below. This is
necessary to place the ribbon in the correct position.
Make sure that the ribbon is installed in front of the print head
without wrinkles or creases. If it is hard to see, open the print
head cover as described in Chapter 3.
If the ribbon is not installed correctly, remove the cassette as
described below and repeat steps 2 and 3 above.
Note:
To remove the ribbon cassette, grasp the ribbon cassette's tab and
pull it out of the printer. See the illustration in step 2 above for the
location of the tab.
To Next Page
Loading...
