PostScript Printer Driver Problems
Note:
e menu items and text on the printer driver vary depending on your computer's environment.
Printer Does Not Print While Using PostScript Printer Driver
❏ Set the Printing Language setting to Auto or PS3 on the control panel.
❏ If you cannot print text data, even when Text Detection is enabled on the control panel, set the Printing
Language setting to PS3.
❏ In Windows, if a large number of jobs are sent, the printer may not print. Select Print directly to the printer on
the Advanced tab in the printer properties.
Related Information
& “System Administration” on page 20
Printer Does Not Print Correctly While Using PostScript Printer
Driver
❏ If the le is created in an application that allows you to change the data format, such as Adobe Photoshop, make
sure that the settings in the application match the settings in the printer driver.
❏ EPS les made in binary format may not be printed correctly. Set the format to ASCII when making EPS les in
an application.
❏ For Windows, the printer cannot print binary data when it is connected to the computer using a USB interface.
Set the Output Protocol setting on the Device Settings tab in the printer properties to ASCII or TBCP.
❏ For Windows, select the appropriate substitution fonts on the Device Settings tab in the printer properties.
Print Quality Is Poor While Using PostScript Printer Driver
You cannot make color settings on the Paper/Quality tab in the printer driver. Click Advanced, and then set the
Color Mode setting.
Printing Is Too Slow While Using PostScript Printer Driver
Set the Print Quality setting to Fast in the printer driver.
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
User's Guide
Solving Problems
110
To Next Page
Loading...
Need help?
General
