Transporting the Printer
When you need to transport the printer to move or for repairs, follow the steps below to pack the printer.
!
Caution:
❏ When carrying the printer, li it using a stable position. Liing the printer using an unstable position may result
in injury.
❏ Because this printer is heavy, it should always be carried by two or more people when unpacking and
transporting.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your ngers when placing the printer.
❏ When carrying the printer, do not tilt it more than 10 degrees; otherwise the printer may fall.
c
Important:
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink cartridge installed. Removing the cartridge can dry out the print head and may prevent the printer
from printing.
❏ Leave the maintenance box installed; otherwise ink may leak during transporting.
1.
Turn o the printer by pressing the
P
button.
2.
Make sure the power light turns o, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is o. Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. Remove all of the paper from the printer.
User's Guide
Appendix
126
To Next Page
Loading...
Need help?
General
