3. Select Fax.
Note: To fax a double-sided document, place your document in the ADF and turn on the ADF 2-
Sided setting. (You cannot fax double-sided documents in color.)
4. Do one of the following to select fax recipients:
• Manually enter a fax number: Press the Enter a Fax Number field, enter a fax number, and
press the button. To add another fax number, repeat this step. You can also use the numeric
keypad on the control panel to enter a fax number.
Note: If direct dialing has been restricted, you can only select the number from the contact list or
fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the Line Type setting, enter the # pound sign
instead of the code.
• Select from the contact list: Select Contacts to display the contact list screen. Select the
checkbox next to one or more contact (select the checkbox again to deselect it). You can also
select the Search field to search for recipients by name, index name, or entry number. Select
Proceed when you are finished.
• Select from the sent fax history: Select History to display the sent fax history. Select a recipient
from the list, select Menu, and select Send to this number.
Note: To delete entered recipients, select the Enter a Fax Number field, select the recipient you
want to delete, and select Delete from the List.
5. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your
settings.
276
To Next Page
Loading...
Need help?
General
