The product sets up the network and displays the Wi-Fi network name (SSID) and password. You
see a screen like this:
7. Scroll down to view the SSID and password.
8. Use your computer or wireless device to select the SSID displayed on the LCD screen, then enter
the password shown.
9. Press the home button to exit.
You see either an AP or Direct connection symbol on the LCD screen and should be able to print
directly to your product from your computer or device.
Note: If the AP or Direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode
is not enabled. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Related references
Status Icon Information
Changing the Wi-Fi Direct Password
You can change the Wi-Fi Direct password from the default to improve the security of your Wi-Fi Direct
connections.
Note: If you change the Wi-Fi Direct password, you cannot use the built-in NFC functionality to connect
to the product. If you have already connected devices or computers to your product via Wi-Fi Direct, they
are disconnected when you change the password.
1. Press the home button, if necessary.
51
To Next Page
Loading...
