Epson WF-6590 User Manual

Wi-Fi Direct Mode Setup
You can set up your product to communicate directly with your computer or another device without
requiring a wireless router or access point.
1 Epson product
2 Computer with a wireless interface
3 Other wireless device
You can select one of these modes to communicate with your computer or device:
Access point mode
The product itself acts as the network access point for up to 4 devices. When operating in this mode,
your product displays an AP connection symbol on the LCD screen.
Peer-to-peer mode
The product communicates one-to-one with another Wi-Fi Direct capable device. When operating in
this mode, your product displays a Direct or D connection symbol on the LCD screen.
To disconnect a peer-to-peer mode connection, release the connection to your product from your
computer or other device.
To enable peer-to-peer mode, you must select it from the Web Config Utility, under WiFi/Network
Settings > Services > Wi-Fi Direct.
Enabling Wi-Fi Direct Mode
Changing the Wi-Fi Direct Password
Parent topic: Wi-Fi or Wired Networking
49

Epson WF-6590 Specifications

General

Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
ADF Capacity	50 sheets
Copy Resolution	600 x 1200 dpi
Print Speed	24 ISO ppm (black), 24 ISO ppm (color)
Scanner Type	Color flatbed ADF
Copy Speed	22 ISO cpm (black), 22 ISO cpm (color)
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	500 sheets
Fax Speed	33.6 Kbps
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Fax Transmission Speed	3 seconds per page