Epson WF-6590 - Safety and Approvals Specifications

Coordination modes Infrastructure mode
Ad hoc mode; no supported by IEEE 802.11 n
Wi-Fi Direct; not supported for IEEE 802.11b
Note: Wi-Fi Direct Simple AP mode available with a Wi-Fi
infrastructure or Ethernet connection.
Ethernet
Standards IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
Note: Use a category 5e or higher STP (shielded twisted pair) cable to prevent risk of radio interference.
Security Protocol
IEEE802.1X; connected device must be IEEE802.1X compliant
IPsec/IP Filtering
SSL/TLS: HTTPS Server/Client or IPPS
STARTTLS (SMTPS)
SNMPv3
Parent topic: Technical Specifications
Safety and Approvals Specifications
United States Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
411