• When lifting the product, hold it as shown here. Holding other areas may cause the product to fall or
cause you to pinch your fingers when placing the product down.
• Leave the maintenance box installed; otherwise ink may leak.
• Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
• Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent
the product from printing.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help
prevent the print head from drying out. Store your product in a cool, dry place.
1. Turn off the product.
2. Unplug the power cord.
3. Disconnect any connected cables.
4. Remove all the paper from the product.
5. Make sure there are no originals on the product.
6. Close the paper support and output tray.
7. Remove the optional paper cassettes (if they are installed) before lifting the product.
337
To Next Page
Loading...
