Epson WorkForce Pro WF-C879RBAM - Page 342

Transmission Setting By Line:
G3-1:
Select an option for standard line G3-1 according to how it will be used (sending only,
receiving only, or sending and receiving). When any optional fax board is not installed
(standard faxing only), this corresponds to Sending and Receiving.
G3-2:
Select an option for extension line G3-2 according to how it will be used (sending only,
receiving only, or sending and receiving).
G3-3:
Select an option for extension line G3-3 according to how it will be used (sending only,
receiving only, or sending and receiving).
Related Information
& “Basic Settings” on page 387
Receive Settings
Save/Forward Settings
Conditional Save/Forward:
You can nd the menu on the printer's control panel below: Settings > General Settings > Fax
Settings > Receive Settings > Save/Forward Settings > Conditional Save/Forward.
Note:
On the Web Cong screen, you can nd the menu below.
Fax tab > Save/Forward Settings > Conditional Save/Forward
You can set saving and/or forwarding destinations to the Inbox, condential boxes, an external
memory device, email addresses, shared folders, and another fax machine.
To switch between enabling or disabling the conditions, tap anywhere on the set item except
for
.
Condition(s)
Select conditions and then make settings.
Received Line Match:
When the line port matches, the received fax is saved and forwarded.
You can also select the following conditions (the same as for standard faxing). See
"Related Information" below for more details.
❏ Sender Fax Number match
❏ Subaddress(SUB) perfect match
❏ Password(SID) perfect match
❏ Receiving Time
Using Optional Items > Fax Board (Super G3/G3 Multi Fax Board) > Fax Settings Menu (When Optional Fax Boar …
342