Epson WorkForce Pro WF-C879RBAM - Page 387

Note:
❏ You can also access Fax Settings from Web Cong. Click the Fax tab on the Web Cong screen.
❏ When you use Web Cong to display the Fax Settings menu, there may be slight dierences in the user interface and in
location compared to the printer's control panel.
Related Information
& “Quick Operation Button” on page 387
& “Basic Settings” on page 387
& “Send Settings” on page 390
& “Receive Settings” on page 391
& “Report Settings” on page 398
& “Security Settings” on page 399
& “Check Fax Connection” on page 399
& “Fax Setting Wizard” on page 400
Quick Operation Button
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Quick Operation Button
Note:
❏ If a password entry screen is displayed, enter the administrator password.
❏ You cannot display this menu on the Web Cong screen.
Quick Operation Button 1, Quick Operation Button 2, Quick Operation Button 3:
Registers up to three shortcuts allowing you to quickly access the menu you use
oen
when sending
faxes. e shortcuts are displayed on the following menu.
Fax > Fax Settings tab.
Basic Settings
You c a n
nd
the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Basic Settings
Note:
❏ On the Web Cong screen, you can nd the menu below.
Fax tab > Basic Settings
❏ If a password entry screen is displayed, enter the password.
Fax Speed:
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
Product Information > Settings Menu List > General Settings
387