❏ Check digit
❏ Change code set character
Print sample
EPSON Code128
EPSON ITF
❏ e EPSON ITF fonts conform to the USSInterleaved 2-of-5 standard (American).
❏ Four EPSON ITF fonts are available, allowing you to enable and disable the automatic insertion of check digits
and OCR-B.
❏ e height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Interleaved 2-of-5 standard. For this reason, it is important to keep at least one space between the bar code and
the surrounding text to prevent overlapping.
❏ Interleaved 2-of-5 treats every two characters as one set. When there are an odd number of characters, EPSON
ITF fonts automatically add a zero to the beginning of the character string.
Character type Numbers (0 to 9)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
e
following codes are inserted automatically and need not be input by hand:
❏ Le/Right quiet zone
❏ Start/Stop character
❏ Check digit
❏ e numeral “0” (added to the beginning of character strings as needed)
Print sample
EPSON ITF EPSON ITF CD
EPSON ITF Num EPSON ITF CD Num
EPSON Codabar
❏ Four EPSON Codabar are available, allowing you to enable and disable the automatic insertion of check digits
and OCR-B.
Product Information
>
Font Specications
>
Epson BarCode Fonts (Windows Only)
432
To Next Page
Loading...
