❏ e height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Codabar standard. For this reason, it is important to keep at least one space between the bar code and the
surrounding text to prevent overlapping.
❏ When either a Start or a Stop character is input, Codabar fonts automatically insert the complementary
character.
❏ If neither a Start nor a Stop character is input, these characters are automatically input as the letter “A”.
Character type Numbers (0 to 9)
Symbols (- $ : / . +)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
e following codes are inserted automatically and need not be input by hand:
❏
Le/Right
quiet zone
❏ Start/Stop character (when not input)
❏ Check digit
Print sample
EPSON Codabar EPSON Codabar CD
EPSON Codabar Num EPSON Codabar CD Num
EPSON EAN128
❏ GS1-128(EAN128) fonts support code sets A, B, and C. When the code set of a line of characters is changed in
the middle of the line, a conversion code is automatically inserted.
❏
e
following 4 kinds of the properties are supported as the Application
Identier
(AI).
01: Global traded item number
10: Batch / Lot number
17: Expiry date
30: Quantity
❏ e height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Code128 standard. For this reason, it is important to keep at least one space between the bar code and the
surrounding text to prevent overlapping.
❏ Some applications automatically delete the spaces at the end of lines or change multiple spaces into tabs. Bar
codes containing spaces may not be correctly printed from applications that automatically delete spaces from
the ends of lines or change multiple spaces into tabs.
Product Information
>
Font Specications
>
Epson BarCode Fonts (Windows Only)
433
To Next Page
Loading...
