❏ Do not reuse a maintenance box which has been removed and le detached for a long period. Ink inside the box
will have
solidied
and no more ink can be absorbed.
❏ Do not remove the maintenance box and its cover except when replacing the maintenance box; otherwise ink
may leak.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how
oen
this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
Replace the maintenance box when you are promoted to do so. e Epson Status Monitor, your LCD, or lights on
the control panel will advise you when this part needs replacing. e need for replacement of the box does not
mean that your printer has ceased to operate in accordance with its specications. e Epson warranty does not
cover the cost of this replacement. It is a user-serviceable part.
1. Remove the new maintenance box from its package.
c
Important:
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation
and printing.
❏ Do not press or remove the
lm
on the box; otherwise ink may leak.
Note:
A transparent bag for the used maintenance box is provided with the new maintenance box.
2. Turn o the printer by pressing the
P
button.
3.
Disconnect all cables such as the power cord and USB cable.
User's Guide
Replacing Ink Cartridges and Other Consumables
61
To Next Page
Loading...
Need help?
General
