The sender's fax number has been registered to the Rejection Number List.
Solutions
Make sure that the sender's number can be deleted from the Rejection Number List before deleting it.
Delete it from Settings > General Settings > Fax Settings > Basic Settings > Rejection Fax > Edit
Blocked Number list. Or disable the Rejection Number List in Settings > General Settings > Fax
Settings > Basic Settings > Rejection Fax > Rejection Fax. Faxes sent from numbers that have been
registered to this list are blocked when this setting is enabled.
Subscribing to a call forwarding service.
Solutions
If you have subscribed to a call forwarding service, the printer may not be able to receive faxes. Contact
the service provider.
Cannot Send Faxes to a Specic Recipient
e following causes can be considered.
The recipient's machine takes a long time to answer.
Solutions
If the recipient machine does not pick up your call within 50 seconds
aer
the printer has
nished
dialing, the call ends with an error. Dial using a connected telephone to check how long it takes before
you hear a fax tone. If it takes more than 50 seconds, add pauses
aer
the fax number to send the fax.
e
is used to enter pauses. A hyphen is entered as the pause mark. One pause is about three seconds.
Add multiple pauses as needed.
The Fax Speed setting registered in the contact list is wrong.
Solutions
Select the recipient from the contact list, select
, and then select Edit > Fax Communication Mode >
Slow(9,600bps).
Cannot Send Faxes at a Specied Time
The printer's date and time is wrong.
Solutions
Select Settings > General Settings > Basic Settings > Date/Time Settings, and then set the correct date
and time.
Faxes Are Sent at the Wrong Size
e following causes can be considered.
The originals are not placed correctly.
Solutions
❏ Make sure the original is placed correctly against the alignment marks.
Solving Problems
>
Cannot Print, Scan, or Fax
>
Cannot Send or Receive Faxes
153
To Next Page
Loading...
Need help?
General
