Epson WorkForce WF-2960DWF - Maintenance Box Code; Software Information; Application for Printing from a Computer (Windows Printer Driver)

For Asia
BK: Black C: Cyan M: Magenta Y: Yellow
09S
09U
*
09S 09S 09S
* "U" indicates a large cartridge.
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
Maintenance Box Code
Epson recommends the use of a genuine Epson maintenance box.
Maintenance box code: T04D1
c
Important:
Once a maintenance box has been installed in a printer it cannot be used with other printers.
Software Information
is section introduces some of the applications available for your printer. For a list of supported soware, see the
following Epson website or launch Epson
Soware
Updater for
conrmation.
You can download the latest
applications.
http://www.epson.com
Related Information
& “Application for Updating Soware and Firmware (Epson Soware Updater)” on page 210
Application for Printing from a Computer (Windows Printer Driver)
e
printer driver controls the printer according to the commands from an application. Making settings on the
printer driver provides the best printing results. You can also check the status of the printer or keep it in top
operating condition using the printer driver utility.
Note:
You can change the language of the printer driver. Select the language you want to use from the Language setting on the
Maintenance tab.
Accessing the printer driver from applications
To make settings that apply only to the application you are using, access from that application.
Select Print or Print Setup from the File menu. Select your printer, and then click Preferences or Properties.
Product Information > Software Information > Application for Printing from a Computer (Windows Printer Driver)
206