EasyManuals Logo

Epson WorkForce WF-2960DWF User Manual

Epson WorkForce WF-2960DWF
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
Error Messages Solutions
Recovery Mode
Update Firmware
The printer has started in recovery mode because the rmware update
failed. Follow the steps below to try to update the rmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
*In some print cycles a very small amount of surplus ink may be collected in the borderless printing ink pad. To
prevent ink leakage from the pad, the product is designed to stop borderless printing when the pad has reached its
limit. Whether and how oen this is required will vary according to the number of pages you print using the
borderless print option. e need for replacement of the pad does not mean that your printer has ceased to operate
in accordance with its specications. e printer will advise you when the pad requires replacing and this can only
be performed by an authorised Epson Service provider. e Epson warranty does not cover the cost of this
replacement.
Paper Gets Jammed
Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces. Next, clear the error. e LCD screen displays an animation that shows you how to remove
jammed paper.
!
Caution:
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
c
Important:
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
Removing Jammed Paper
!
Caution:
Be careful not to trap your hand or
ngers
when opening or closing the scanner unit. Otherwise you may be
injured.
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating,
it could cause an injury. Be careful not to touch the protruding parts to avoid injury.
Solving Problems
>
Paper Gets Jammed
>
Removing Jammed Paper
181

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce WF-2960DWF and is the answer not in the manual?

Epson WorkForce WF-2960DWF Specifications

General IconGeneral
Print TechnologyInkjet
FunctionsPrint, Copy, Scan, Fax
Scan Resolution1200 x 2400 dpi
Paper HandlingAutomatic Document Feeder
ConnectivityUSB, Ethernet, Wi-Fi, Wi-Fi Direct
Display2.4-inch color LCD
Duplex PrintingYes
Scanner TypeFlatbed
Mobile PrintingApple AirPrint
Paper SizesA4, A5, A6, B5, Letter, Legal
Dimensions375 x 347 x 230 mm
Print Resolution5760 x 1440 dpi

Related product manuals