EasyManua.ls Logo

Epson WorkForce WF-2960DWF - Preventing Paper Jams; It Is Time to Replace the Ink Cartridges; Ink Cartridge Handling Precautions

Epson WorkForce WF-2960DWF
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.
Close the ADF cover until it clicks.
Preventing Paper Jams
Check the following if paper jams occur frequently.
Place the printer on a
at
surface and operate in the recommended environmental conditions.
“Environmental
Specications
” on page 233
Use the paper supported by this printer.
“Available Paper and Capacities” on page 202
Follow paper handling precautions.
“Paper Handling Precautions” on page 25
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
“Loading Paper” on page 27
Do not load more than the maximum number of sheets specied for paper.
Load one sheet of paper at a time if you have loaded several sheets of paper.
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
“List of Paper Types” on page 26
Clean the roller inside the printer.
“Improving Paper Feeding Problems” on page 103
It is Time to Replace the Ink Cartridges
Ink Cartridge Handling Precautions
Read the following instructions before replacing ink cartridges.
Storing precautions for ink
Keep the ink cartridges out of direct sunlight.
Do not store the ink cartridges in high or freezing temperatures.
For best results, Epson recommends using up ink cartridges before the best before date printed on the package,
or within six months of opening the package, whichever is earlier.
Solving Problems
>
It is Time to Replace the Ink Cartridges
>
Ink Cartridge Handling Precautions
186

Table of Contents

Related product manuals