Epson WorkForce WF-2960DWF - Page 223

prevent condential documents from being disclosed while you are away. Before using this
feature, make sure there is enough free memory.
Time to Stop:
Stops printing documents.
Time to Restart:
Restarts printing documents automatically.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings
You c a n
nd
the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Report Settings
Fax Log Auto Print:
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a specied time. However, if the number of fax jobs
exceeds 30, the log is printed before the specied time.
Attach Fax image to report:
Prints a Transmission Report with an image of the
rst
page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to
t
onto the report.
Report Format:
Selects a format for fax reports in Fax > (More) > Fax Report other than Protocol Trace. Select
Detail to print with error codes.
Security Settings
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Security Settings
Direct Dialing Restrictions:
Selecting On disables manual entry of the recipient's fax numbers allowing the operator to select
recipients only from the contacts list or sent history.
Selecting Enter Twice requires the operator to enter the fax number again when the number was
manually entered.
Selecting O enables manual entry of the recipient's fax numbers.
Broadcasting Restrictions:
Selecting On allows only one fax number to be entered as the Recipient.
Product Information > Settings Menu List > General Settings
223