Epson XP-8700 Series

When Replacing a Computer
You need to install the printer driver and other soware on the new computer.
Access the following website, and then enter the product name. Go to Setup, and then start setting up. Follow the
on-screen instructions.
https://epson.sn
When the Software Disk is not Available
You can download the same contents as found on the soware disk from the Internet.
is is useful if your computer does not have a CD/DVD drive, or if you have lost the soware disc that was
supplied with the product.
Access the following website, and then enter the product name. Go to Setup, and then start setting up. Follow the
on-screen instructions.
https://epson.sn
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
1.
Select Settings on the home screen.
2.
Select Basic Settings.
3.
Do one of the following.
❏ Select Sleep Timer or Power O Settings > Power O If Inactive or Power O If Disconnected.
❏ Select Sleep Timer or Power O Timer.
Note:
Your produc t may have the Power O Settings or Power O Timer feature depending on the location of purchase.
4.
Select the setting.
Disabling your Wi-Fi Connection
If you used to use Wi-Fi (wireless LAN) but no longer need to do so due to a change in connection mode and so
on, you can disable your Wi-Fi connection.
By removing unnecessary Wi-Fi signals, you can also reduce the load on your standby power.
1.
Tap
on the printer's home screen.
In These Situations > Disabling your Wi-Fi Connection
114