Epson XP-8700 Series

c
Important:
❏ Before printing on the CD/DVD, see the CD/DVD handling precautions.
“CD/DVD Handling Precautions” on page 42
❏ Do not insert the CD/DVD tray while the printer is operating. is may damage the printer.
❏ Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the CD/DVD is
ejected.
❏ Place a CD/DVD on the CD/DVD tray with the printable side facing up. Press the center of the CD/DVD to
securely set it on the CD/DVD tray. Otherwise, the CD/DVD may fall o the tray. Turn over the tray to check
that the CD/DVD is rmly secured in the tray.
❏ Aer printing is nished, make sure you remove the CD/DVD tray. If you do not remove the tray and turn the
printer on or o, or run head cleaning, the CD/DVD tray will strike the print head and may cause the printer to
malfunction.
Note:
❏ You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.
❏ e outer diameter and the inner diameter you set are restored to their defaults aer printing the disc label. You need to
set these diameters every time you print.
“Menu Options for Copy to CD/DVD” on page 84
❏ To make a test print, select Test print on A4 paper, and then load A4 plain paper in the paper cassette. You can check the
printout image before printing on a CD/DVD label.
❏ You may feel slight friction when inserting the tray into the printer. is is normal and you should continue to insert it
horizontally.
❏ Select
to view the scanned image. You can adjust the printing position on the preview screen.
Menu Options for Copy to CD/DVD
Inner, Outer:
Specify the print range. Up to 120 mm for the outer diameter, and a minimum of 18 mm for the inner
diameter can be specied. Depending on the setting, the CD/DVD or CD/DVD tray may get dirty.
Set the range to t the printable area of your CD/DVD.
Copying > Copying on a CD/DVD Label > Menu Options for Copy to CD/DVD
84