Continue Printing Temporarily without Replacing Ink Cartridges
Temporarily Printing with Black Ink
When color ink is expended and black ink still remains, you can use the following settings to continue printing for
a short time using only black ink.
❏ Type of paper: plain papers, Envelope
❏ Color: B&W or Grayscale
❏ Borderless: Not selected
❏ EPSON Status Monitor 3: Enabled (When printing from the printer driver on Windows.)
Because this feature is only available for approximately ve days, replace the expended ink cartridge as soon as
possible.
Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ e available period varies depending on the usage conditions.
Temporarily Printing with Black Ink - Control Panel
1.
When a message is displayed prompting you to replace the ink cartridges, select Next.
A message is displayed telling you that you can temporarily print with black ink.
2.
Check the message, and then select Dismiss.
3.
If you want to print in monochrome, select No, remind me later.
e
ongoing job is canceled.
4.
Now you can copy originals on plain paper in monochrome. Select the feature you want to use on the home
screen.
Note:
Borderless copying is not available.
Continue Printing Temporarily with Only Black Ink (Windows)
Do one of the following.
Solving Problems
>
It is Time to Replace the Ink Cartridges
>
Continue Printing Temporarily without Replacing In
…
179
To Next Page
Loading...
