Epson XP-8700 Series

"!" is Displayed on the Screen and you Cannot Select Photos
The image le is not supported.
Solutions
"!" is displayed on the LCD screen when the image le is not supported by the product. Use les
supported by the product.
& “Supported Data
Specications
” on page 212
The le name is too long to be recognized by the printer.
Solutions
You can print photos by saving the image les on the memory device to your computer or smart device.
For smart devices, you can print using Epson Smart Panel.
Cannot Pinch in or Pinch out
Not enough pressure is being used when pressing on the screen.
Solutions
If you cannot pinch in or pinch out correctly, perform operations while pressing lightly on the screen.
Cannot Close the Control Panel
The output tray is not fully stored.
Solutions
Select
or push the output tray fully into the printer with your hand until it touches the back
of the slot, and then close the control panel.
Cannot Close the Scanner Unit
The scanner unit is designed to close slowly and resist a little as a precaution against
catching ngers.
Solutions
Continue to close even if you feel some resistance.
Solving Problems > Cannot Operate the Printer as Expected > Operations are Slow
187