1.
Place the originals.
“Placing Originals” on page 45
2.
Select Scan on the control panel.
3.
Select WSD.
4.
Select a computer.
5.
Tap
x
.
Note:
e color, size, and border of the scanned image will not be exactly the same as the original.
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏ e printer and the computer are connected to the network.
❏
e
printer driver is installed on the computer.
1.
Turn the printer on.
2.
Click start, and then click Network on the computer.
3.
Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Scanning
>
Scanning Originals Using WSD
>
Setting Up a WSD Port
96
To Next Page
Loading...
