Display Order:
Changes the display order of photos in ascending or descending order.
Select All Photos:
Selects all the photos and sets the number of prints.
Deselect All Photos:
Returns the number of prints of all photos to 0 (zero).
Select Memory device:
Select the device from which you want to load photos.
Menu Options for Paper and Print Settings
Paper Setting:
Select the paper source that you want to use. Select to select the paper size and type.
Border Setting
❏ Borderless:
Prints without margins around the edges. Enlarges the print data slightly more than the
paper size so that no margins are printed around the edges of the paper.
❏ With Border:
Prints with white margins around the edges.
Expansion:
With borderless printing, the image is enlarged a little to remove borders from the edges of the
paper. Select how much to enlarge the image.
Fit Frame:
If the aspect ratio of the image data and the paper size is dierent, the image is automatically
enlarged or reduced so that the short sides match the short sides of the paper.
e
long side of
the image is cropped if it extends beyond the long side of the paper. is feature may not work
for panorama photos.
Quality:
Select the print quality. Selecting High provides higher quality printing, but the printing speed
may be slower. If you want to print on plain paper using a much higher quality, select Best.
Note that the printing speed may slow down considerably.
Date:
Select the format used to print the date on photos for photos that include the date the photos
were taken or the date they were saved. e date is not printed for some layouts.
Print Info On Photos
❏ O:
Prints without any information.
Printing
>
Printing Photos
>
Printing Photos from a Memory Device
50
To Next Page
Loading...
