c
Important:
❏ Before printing on the CD/DVD, see the CD/DVD handling precautions.
❏ Do not insert the CD/DVD tray while the printer is operating.
is
may damage the printer.
❏ Start printing and insert the CD/DVD tray when you are instructed to do so. Otherwise, an error occurs and the
CD/DVD is ejected.
❏ Place a CD/DVD on the CD/DVD tray with the printable side facing up. Press the center of the CD/DVD to
securely set it on the CD/DVD tray. Otherwise, the CD/DVD may fall o the tray. Turn over the tray to check
that the CD/DVD is
rmly
secured in the tray.
❏ Aer printing is nished, make sure you remove the CD/DVD tray. If you do not remove the tray and turn the
printer on or
o,
or run head cleaning, the CD/DVD tray will strike the print head and may cause the printer to
malfunction.
Note:
❏ When you change the outer and inner diameter, select
at the upper-right of the screen, and then select CD Inner/
Outer. Set the outer and inner diameter using
, and then select OK. You can also set the diameter by selecting the
value in the frame and using the on-screen keypad.
You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.
❏ e inner diameter and the outer diameter you set are restored to their defaults aer printing the disc label. You can
change the defaults in Settings > Printer Settings > CD Inner/Outer.
❏ You may feel slight friction when inserting the tray into the printer. is is normal and you should continue to insert it
horizontally.
Related Information
& “Menu Options for Printing from the Control Panel” on page 49
& “CD/DVD Handling Precautions” on page 42
Printing
>
Printing onto a CD/DVD Label
>
Printing Photos onto a CD/DVD Label
71
To Next Page
Loading...
