8 • Installation
46 / 70
80114-770_V23802
2021-01
3. Place and secure the argon gas
cylinder in the VIO Cart
Fig. 8-8
Place the argon gas tank into the well. Wrap the strap around the tank and connect it
to the hook (1). Secure the cylinder to the VIO Cart by firmly pulling on the strap and
tightly overlapping the Velcro (2).
4. Connect the APC 3 pressure
reducer with sensor to the
argon gas cylinder
Fig. 8-9
1. As necessary, remove the cylinder cap from the argon gas tank. Note: The valve of
cylinder should be closed.
To Next Page
Loading...
Need help?
General
