ESAB PT-36 - Page 16

146
SECTION 4 OPERATION
 
 
      
SAFETY INFORMATION REGARDING HAZARDS ASSOCIATED
WITH THESE ALLOYS.
DO NOT PLASMA CUT THE FOLLOWING Al-Li ALLOYS WITH WATER:
 
 
 
 
 
SPARK HAZARD.
HEAT, SPATTER, AND SPARKS CAUSE FIRE AND BURNS.
 
 
 

 
FROM YOURSELF AND OTHERS WHEN ACTIVATING PLASMA
PROCESS.
 
 
 
POSED AREAS.
 
AND SLAG.
WARNING
EXPLOSION HAZARD.
Al-Li
EXPLOSIONS WHEN PLASMA CUT WITH WATER.
WARNING