ESI Phone - Advanced Call and Message Management; Urgent Messages and Twinning; Personal Call Routing Configuration

User’s Guide User programming: An introduction
C.7
4 Urgent message activation
1 Urgent messages only
Only urgent messages will be delivered.
Note: Remember to say in your personal greeting that callers should press 2 to mark a message as
urgent. (For more on personal greetings, see page D.1.)
2 All new messages
Any new message will be delivered.
5 (Unused)
6 Twinning programming
Note: This feature is not available on an ESI Cordless Handset.
1 Enable/disable
2 Twinning destination
7 Personal Call Routing
1 ESI Presence Management settings
For additional details, consult the ESI Presence Management User’s Guide (ESI part # 0450-0793).
Note: This function is available only if your phone system is using ESI Presence Management. If you’re not
sure whether it is, consult your System Administrator. For more information about ESI Presence
Management, visit www.esi-estech.com/presence.
1 Entry settings
1 Select personal greeting
2 Set message delivery
2 Exit settings
1 Call handling (voice mail/call forwarding)
2 Select personal greeting
3 Set message delivery
3 Quiet time settings
1 Select day
2 Select quiet “on” time
3 Select quiet “off” time
(Continued)