Ensure that the tool is correctly fixed onto the axle using the keys.
Remove the mounting tool and the Allen key
The wheel is installed.
When replacing a chamfering wheel with a step bevel wheel, or cleaning the machine, the
statistics will be saved by default.
>The icon appears by default at the bottom of the screen.
In case of replacement:
• of the chamfering wheel with a new step bevel wheel: you must press to reset
the statistics to 0.
The icon appears, the statistics are cleared.
• of the step bevel wheel with a new chamfering wheel: you must press to reset
the statistics to 0.
The icon appears, the statistics are cleared.
Press to confirm the tool change, then to exit the menu.
To Next Page
Loading...
