b. Clean the door, the “small tools” module and the wheels
From the work screen of the edger , select > > to access the cleaning menu.
The following screen is displayed:
Cleaning the door and the “small tools” module
1. Cleaning the door
a. Press to start the door cleaning cycle.
The module moves to facilitate the cleaning.
> The door opens.
b. Use a cloth to clean the inside of the door.
2. Cleaning the module and trough
Press to start the cleaning cycle.
> The door closes.
> The cleaning is done automatically.
Clean the step bevel wheel
In case the cycle time continues for a significant period or a “too much strain” warning appears, the step
bevel wheel can be cleaned.
1. Dismantle the wheel
2. Clean the wheel with a decalcifer such as white vinegar.
Cleaning must be performed only when the wheels have been disassembled and are outside the
trough.
To Next Page
Loading...
Need help?
General
