The edging screen for the second lens is displayed. All finishes chosen and the modifications made
are kept.
7. DO A MIXED JOB
In this section, you will find the required procedure to do a mixed job:
• Description of menu screens (F p.57)
• Configuring the mixed finish (F p.59)
This finish enables you to do mixed jobs such as the following:
• Groove - Groove
• Bevel - Groove
• Flat-edge - Groove
• Flat-edge - Bevel
To do a mixed finish, you need to define the points between which the two types of finish will be done. Only
the customized mode is thus accessible.
a. Legend screens
Main screen for mixed jobs
1. Modes available for a mixed finish
◦ Automatic mode: the position of the bevel or groove is automatically calculated according to
the information acquired when tracing the frame and feeling the lens.
To Next Page
Loading...
