1. Power socket
2. Solenoid valve socket
3. Pump socket (tank + pump) / Solenoid valve socket (town)
Accessories
Stylus
Posiblock removal pliers
Triangular key
White dressing stone for finishing wheel
Square dressing stone for polishing wheel
Transport wedges to be kept
Accessory box
- Usage :
• 22 mm posiblock holder
• 18 x 14 mm posiblock holder
• 22 mm stop
• 18 x 14 mm stop
• Mill/drill bit replacement tool (blocking key)
• Ø 1.0 mm drill bit (quantity 2, including one mounted on the module)
• Ø 0.8 mm drill bit
• Ø 1.5 mm edging mill bit (quantity 2, including one mounted on the module)
• Ø 20 mm grooving wheel (mounted on the module)
• Chamfering wheel (mounted on the module)
• Step bevel wheel
- Maintenance
• Blocking key for tool changes (drill bit/mill bit)
• Adjustable wrench for tool changes (drill bit/mill bit)
• Accessory for Step bevel wheel assembly/dismantling
• Adjustable wrench for tool changes (drill bit, mill bit, chamfering wheel)
Options
• Open or closed circuit spraying kit
• Milling chip recovery tray
• Posiblock holder and “Weco” posiblock stop” accessory kit
• M’Eye Sign Box
Connection accessories
• 220 V power cable
• RJ45 cable for the tracer-edger connection
• Essibox connection cable
• Wastewater evacuation pipe with attachment ring
• 2 connectors to clip onto two internal water pipes and connect to the rinsing kit
To Next Page
