ES720.1 - User’s Guide10
Basic Safety Notices ETAS
Requirements for the technical state of the product
The product is designed in accordance with state-of-the-art technology and rec-
ognized safety rules. The product may be opera
ted only in a technically flawless
condition and according to the intended purpose and with regard to safety and
dangers as stated in the respective product documentation. If the product is not
used according to its intended purpose, the protection of the product may be
impaired.
Requirements for operation
• Use the product only according to the specifications in the corresponding
User's Guide. With any deviating operation, the product safety is no lon-
ger ensured.
• Observe the requirements on t
he ambient conditions.
• Do not use the product in a wet or damp environment.
• Do not use the product in potentially explosive atmospheres.
ES720.1 in combination with ETK
Any change of the hardware setup from ES720.1 and ETK or a software update
of the ES720.1 can cause a reset of the ECU.
Risk of burns on hot surfaces of the module!
Avoid touching the surfaces of the module during operation at high
ambient temperatures.
During its use in the vehicle and at an ambient temperature of 70 °C,
the module may reach surface temperatures of up to 90 °C.
Inadvertent reset of ECU can cause engine shutdown!
If you operate the ES720.1 in combination with an ETK, new experi-
ments with ETK may be loaded onto the ES720.1 only with the vehi-
cle at standstill!
It is absolutely necessary to wait before the drive until the MEAS LED
at the ES720.1 module is permanently lit.
To Next Page