ETAS ES720.1 - Preparing the ES720.1 for Operation

ES720.1 - User’s Guide46
Configurations and Applications ETAS
• In the root directory of the USB memory stick, cre-
ate a Licenses directory (Root-
Folder\Licenses).
• Copy the license file to the Licenses directory.
• In the ES720 Configurator, open the "Hardware
Configuration" window.
• Open the "File transfer settings" node.
• Open "USB settings".
•Activate Enable automatic transfer.
• Connect the USB memory stick with the ES720.1.
• Select Tools  File Persist current system cofig-
uration.
The ES720.1 is rebooting.
Automatically adding a license (automatic file transfer).
• In the root directory of the PC, create a Licenses
directory (RootFolder\Licenses).
• Copy the license file to the Licenses directory.
• In the ES720 Configurator, open the "Hardware
Configuration" window.
• Open the "File transfer settings" node.
• Open the "File exchange configuration" node.
• Open "Automatic transfer settings".
•Activate Enable automatic transfer.
The license file will be transferred to the ES720.1
with the next synchronization.
• Select Tools  File Persist current system cofig-
uration.
The ES720.1 is rebooting.
6.4 Preparing the ES720.1 for Operation
The ES720.1 module must be prepare for operation in four steps:
• Starting the ES720.1 (first booting).
• Adding a license manually.
• Setting date, time and time zone to your local time.
• Rebooting the ES720.1
Starting the ES720.1
• Press the "Power" button on the front side of the
module to start the ES720.1.
The ES720.1 is booting with an error message that
no valid license is available. After booting the LED
ER is on.